LED street light Blueboo LED lighting After-sales service

Dear Clients,

Thank you for selecting our products.

>>more

lighting

The product appearance, color, parameters listed in this site are  only for reference, please make the objects as the standard. We reserve the right without pre-notification at any time to modify or cancel the relevant parameters of the information on this website. If in doubt, please call the customer service hotline.

current position
Current Position: Home > Products > LED TUBE

T8 LED TUBE SMD2835 150CM

Inquiry Now
 

Product Overview

Specifications

150cm T8 LED Tube Light Spec (SMD2835)
 Technical Specification Description
Input Voltage100V-240V AC
Frequency50/60Hz
Color temperatureWW(2700K-3300K),PW(3800K-4600K),CW(5500K-6500K)
Luminous efficacy100-120Lm/W
Light source2835 SMD LED
Beam angle150±5°
Power consumption22±1W     24±1W     28±1W 
LED Quantity120pcs,   132pcs ,  144pcs,
Power Factor>0.9, efficiency:>0.9
Color Rendering Index (CRI)80
Lens TypeT(Transparent),M(Milky)
Housing MaterialsAluminum and PC cover
PC cover shapeRound shape for transparent, Oval shape for Milky cover
Working temperature-20~+45℃,10%~90%R.H
Storage temp./humidity-30~65℃,0%~95%R.H
Dimension¢26xL1498±1mm(not including pins)
Packing SizeL159*W23*H24CM
Gross Weight/Carton12.0Kg
Net Weight11.0Kg
1x20' Container Load7975Pcs
CertificationsCE,RoHS, SAA, ERP
Quantity/Carton25pcs/carton
LED DiverBuilt-in Steady current output
Start time<0.1S
Light DecayLess Than 5% after 6000 Hours
Lifetime50000hours
Warranty Period3years

Description

Luminosity Distribution & Illuminance

 Product Features:
●Housing: Pure aluminum material with good heat conduction and excellent heat dissipation;very elegant shape;
●Led source:high luminous 2835 units SMD  led with good internal heat dissipation design;
●Led tubes for every ballast;
●No rf interference,no flickering or buzzing;
●Quick and easy installation to minimize retrofit costs;
●No mercury and other hazardous materials,fully Rohs compliant;
●Universal Voltage: 100-240VAC, 277VAC, 12V/24V/36VDC;
●Led driver:High power factory constant current with over power,over current and over load protection to make sure led light long life span;
●Color Rendering Index (CRI):  80;
●High Quality Bulit-in Driver;
●PC cover shape: Round shape for transparent, Oval shape for Milky cover;
●No light shade for transparent lens, no light span for milky cover;
●High Luminous efficacy: 100-120Lm/W;
●Wide Range of Color Temperature Available(2700K-10000K);
●Direct replacement of T8, T9, T10, T12 Fluoresent Tube;
●PC Lens +Aluminum Housing with G13 Base;
●Light Decay Less Than 5% after 6000 Hours;
●Life span:50,000 hours(brightness maintenance rate:80%). 
Model NumberLens TypeColor Temperature(K)Luminous Flux(lm)
T8-150-120LEDs-22WTransparent(Clear) WW 2700K-3300K2040lm
  PW  3800K-4600K2120lm
  CW  5500K-6500K2170lm
T8-150-120LEDs-22WMilky(Frost)WW 2700K-3300K1760lm
  PW  3800K-4600K1815lm
  CW  5500K-6500K1860lm
T8-150-132LEDs-24WTransparent(Clear) WW 2700K-3300K2230lm
  PW  3800K-4600K2320lm
  CW  5500K-6500K2365lm
T8-150-132LEDs-24WMilky(Frost)WW 2700K-3300K1920lm
  PW  3800K-4600K1980lm
  CW  5500K-6500K2030lm
T8-150-144LEDs-28WTransparent(Clear) WW 2700K-3300K2600lm
  PW  3800K-4600K2700lm
  CW  5500K-6500K2760lm
T8-150-144LEDs-28WMilky(Frost)WW 2700K-3300K2240lm
  PW  3800K-4600K2310lm
  CW  5500K-6500K2370lm

Size:22W 24W  28W 1500mm Tube A=1502mm B=1498mm
Wiring Installation Instructions:
★. NOTE:Please read this entire manual to fully understand and safely use this product Specifications are subject to change without notice; 
★. PLANNING THE INSTALLATION     
This led tube can only work with specific matching voltage 100-240v ac Unmatched or other specification voltage will make the led tube burn out;
★. WARNING:risk of electric shock disconnect the main power before installation
★. WARNING: to prevent wiring damage or abrasion,do not expose wiring to edges of sheet metal or other sharp objects
★. Required Outfits:lnsulating tape(electrical purpose) linemen's pliers,gloves,screwdriver,wires (if needed)
★. LED tube works only with specific matching voltage and connection,which can be found on the label for retrofit or new installation, existing ballast shall be replaced with the matching external power supply,existing starter shall be removed,and circuit shall be reconfigured  
★. Wiring Diagram with Electronic Ballast:

★. Installation steps:
Step 1: Turn off main power before installation for safety,make sure main power source is switched off before attempting to install; 
Step 2: Please take existing fluorescent light out,recycle it as appropriately be aware of the breakage of the fluorescent light,fluorescent light contains hazardous substance like mercury,inhaling of mercury would cause health risk leave the installation site for ventilation for ventilation for 30 minutes if the fluorescent light breaks; 
Step 3: Take the electric ballast out. disconnect all power wires from ballast to open-circuit the electric ballast;
Step 4: Connect the two pairs of output wires of ballast to junction box;
Step 5: mount the led tube light into the lamp holder. 
★. Power Connection Mode for LED tubes: (One is double ends, one is single end)

★. Wiring Diagram with Inductive (Magnetism) Ballast:

DOUBLE ENDS POWER CONNECTION MODE

SINGLE END POWER CONNECTION MODE
★. Installation steps:      
Step 1:turn off main power before installation for safety,make sure main power source is switched off before attempting to install; 
Step 2:take existing fluorescent light out,recycle it as appropriately be aware of the breakage of the fluorescent light,fluorescent light contains hazardous substance like mercury,inhaling of mercury would cause health risk leave the installation site for ventilation for ventilation for 30 minutes if the fluorescent light breaks;
Step 3: take the starter out, or use the special designed jumper(LED starter) to replace the starter;
Step 4:inductance ballast short-circuit both ends of, or cut off inductance ballast both ends of the line of  connected together, and then insulating tape;
Step 5: mount the led tube light into the lamp holder. 

ABOUT US
SOLARCUPID ENERGY CO., LTD. was established in January 2006, mainly specializes in R&D, production and sales of LED lighting, DC energy saver, solar lighting, solar PV modules, solar system, solar electric products and providing solutions for varieties of renewable energy products projects...
PRODUCTS LIST
Street light
landscape light
ceiling/wall mounted
luminairesunderground light,
LED light
solar light
street light pole
landscape light pole
Applications
Corporate Complexes
Governments
International Roadways
Military Mining & Industry
Multi-Site Retail
Parks & Recreation
Schools & Universities
Transit/Bus Stops
Transportation & Airports
Partners
Home        About Lighting         Products          News        Sitemap         Contact us
Copyright © 2015 Solarcupid.com All Rights Reserved.